展示架

新闻分类

联系我们

深圳ag棋牌厅有机玻璃制品有限公司

联系人:钟耀

手 机:13686892565

联系人:颜诗微

手 机:18820964050
联系人:洪永强
手 机:18823312815
联系人:陈志强
手机:13530083552
联系人:陈小姐
手机:17746976669
电 话:4008633858 / 0755-85205778
邮 箱:[email protected]
地 址:深圳市龙岗区爱联嶂背路美英巷2号3楼

亚克力展示架打孔是如何操作的

您的当前位置: 首 页 >> ag真人登录 >> 行业新闻

亚克力展示架打孔是如何操作的

发布日期:2019-08-08 17:12 来源: 点击:

许多人都知道亚克力展示架上的穿孔会导致展示板爆裂。那么爆炸是怎么发生的,怎么处理的呢?以下是供参考的简要摘要:

Many people know that perforations on acrylic display shelves can cause display panels to burst. So how did the explosion happen and how did it deal with it? The following is a brief summary for reference:

1。压克力面板上的螺丝在冲压后会爆裂,这通常是由于操作不当造成的。亚克力板的热膨胀系数和冷膨胀系数很大,通常是金属的9倍。因此,在压克力板打孔时,应注意压克力板的膨胀需要留有间隙,并钻一个较大的孔。当丝绸太紧时,就会爆裂。另外,简单的打孔时不要离边缘太近。

1. The screw on the acrylic panel will burst after stamping, which is usually due to improper operation. The thermal expansion coefficient and cold expansion coefficient of acrylic plate are very large, usually 9 times of that of metal. Therefore, when punching the acrylic plate, attention should be paid to the expansion of the acrylic plate needs to leave a gap and drill a larger hole. When silk is too tight, it bursts. In addition, don't be too close to the edge when punching simply.

2。用普通麻花钻,磨成三角形,中间点稍高,使钻头能钻有机玻璃。或用手钻,钻孔力应均匀,玻璃板下留洞应小,以提高玻璃的强度。你也可以在玻璃上撒一些沙子来增加摩擦力。亚克力,亚克力电子烟展架,亚克力展示架,亚克力厂家
2. With ordinary twist drill, grinding into a triangle, the middle point is slightly higher, so that the drill bit can drill plexiglass. Or with a hand drill, the drilling force should be uniform, and the hole under the glass plate should be small to improve the strength of the glass. You can also sprinkle some sand on the glass to increase friction.

三。压克力显示架上的冲压位置不应用酒精擦洗,否则容易爆裂。

Three. The punching position on the acrylic display rack should not be scrubbed by alcohol, otherwise it will burst easily.

相关标签:亚克力,亚克力电子烟展架,亚克力展示架,亚克力厂家

在线客服
  • 钟生
  • 陈小姐
  • 洪生
  • 颜小姐
  • 陈生?
二维码

扫描二维码

分享
欢迎给我们留言
请在此输入留言内容,我们会尽快与您联系。
姓名
联系人
电话
座机/手机号码
点击这里给我发消息
友情链接:亚美手机版  bet36体育网站  环亚ag手机版  凯发官网  利来w66最给力的老牌  唐人娱乐