展示架

新闻分类

联系我们

深圳ag棋牌厅有机玻璃制品有限公司

联系人:钟耀

手 机:13686892565

联系人:颜诗微

手 机:18820964050
联系人:洪永强
手 机:18823312815
联系人:陈志强
手机:13530083552
联系人:陈小姐
手机:17746976669
电 话:4008633858 / 0755-85205778
邮 箱:[email protected]
地 址:深圳市龙岗区爱联嶂背路美英巷2号3楼

亚克力丝网印刷步骤详解

您的当前位置: 首 页 >> ag真人登录 >> 行业新闻

亚克力丝网印刷步骤详解

发布日期:2019-08-16 14:43 来源: 点击:

1。框架。亚克力丝印的网架有两种:木框和铝框。木框架比铝框架便宜,但拉出的网容易松弛,因此铝框架的可回收性较差,铝框架的可回收性高于木框架。

1. Framework. There are two kinds of screen printing frames for acrylic box: wooden frame and aluminium frame. Wood frame is cheaper than aluminium frame, but the net pulled out is easy to relax, so the recyclability of aluminium frame is poor, and the recyclability of aluminium frame is higher than that of wood frame.亚克力,亚克力电子烟展架,亚克力展示架,亚克力厂家
2。筛纱。筛网纱种类繁多,如尼龙筛网纱、锥形筛网纱、金属筛网纱等,但一般采用尼龙筛网纱。

2. Screen yarn. There are many kinds of screen yarn, such as nylon screen yarn, tapered screen yarn, metal screen yarn, etc., but nylon screen yarn is generally used.

第三,拉网。有手动拉网、机械拉网和气动拉网,但对于一般的亚克力纸箱加工厂来说,由于其自身的印刷要求不是很高,所以使用手动拉网和机械拉网是可以的,气动拉网不是很有用。

Third, pull the net. There are manual pulling, mechanical pulling and pneumatic pulling, but for the general acrylic carton processing plant, because of its own printing requirements are not very high, so the use of manual pulling and mechanical pulling is possible, pneumatic pulling is not very useful.

第四,洗网。用化学品清洗蚊帐很费时。专业的亚克力纸箱厂通常直接使用洗衣粉。将网板弄湿,然后用棉布在两侧打磨。抛光时,用力要轻,避免网纱脱落,然后放在烘干机里晾干,待命。

Fourth, washing the net. Cleaning mosquito nets with chemicals is time-consuming. Professional acrylic carton factories usually use detergent directly. Wet the mesh and then polish it on both sides with cotton cloth. When polishing, the force should be light to avoid the net yarn falling off, and then put in the dryer to dry, standby.

5。升级感光膏。在市场上,感光膏需要自己转移。先用热水湿网印花,然后倒入感光膏中,充分调整后备用。市场上有自动上浆机,其厚度均匀,也可由制版商调整大小。

5. Upgrade the sensitizer. In the market, the paste needs to be transferred by itself. First, wet screen printing with hot water, then pour into the paste, fully adjust and reserve. There are automatic sizing machines on the market, which have uniform thickness and can be adjusted by plate makers.

6。烘焙板和出版。烤盘一般在30度左右的热风烘烤机中进行烘烤,上浆几次,烘烤几次。烘烤网必须彻底干燥。烤盘的厚度通常是特定于丙烯酸盒的要求。对于pvc来说,薄膜通常是很好的一次。出版时要注意每一个字的完整性和流畅性。

6. Baking board and publishing. The baking tray is usually baked in a hot air baking machine of about 30 degrees, sizing several times and baking several times. The baking net must be thoroughly dried. The thickness of the baking tray is usually specific to the requirements of the acrylic box. For pvc, the film is usually a good one. When publishing, we should pay attention to the integrity and fluency of every word.

相关标签:亚克力,亚克力电子烟展架,亚克力展示架,亚克力厂家

在线客服
  • 钟生
  • 陈小姐
  • 洪生
  • 颜小姐
  • 陈生?
二维码

扫描二维码

分享
欢迎给我们留言
请在此输入留言内容,我们会尽快与您联系。
姓名
联系人
电话
座机/手机号码
点击这里给我发消息
友情链接:宝运莱娱乐手机版  尊龙d88注册  环亚ag平台官方入口  ag体育网  金百利国际  申博亚洲